 |
Fully
digitalized microprocessor controlled |
|
Energy
saving (UPS sleep mode) |
|
Smart
communication port* |
|
Tel/Internet/Network
surge protection* |
|
50/60hz
frequency auto sensing |
|
Cold Start
(DC Power on) |
|
Line ok,
on battery LED, replace battery LED |
|
Short Circuit
and overload protection |
|
Single PCB
with reliable wireless design |
|
Advanced
battery management (ABM) |
|
Automatic
diagnostics & battery check |
| |
*
Features available on 1000VA and above models |
| Model
|
COM-250 |
COM-350 |
COM-500 |
COM-650 |
| Power Rating |
250VA |
350VA |
500VA |
650VA
|
| Input |
| Voltage |
100V
+20% / -15% at line input
115V220V +/-20% at line input
240V +15% /-20% at line input |
| Frequency |
50
or 60Hz +/- 10% (auto sensing) |
| Output |
| Voltage |
Simulated
sine wave at 100V/115V/220V/230V +/-5% |
| Frequency |
50
or 60Hz +/- 0.5% |
| Transfer Time |
2
~ 4 milliseconds typically, inckuding detection time |
| Protection
and Filtering |
| Unit
Input |
Fuse
for overload & short circuit protection |
| Overload |
UPS
automatic shutdown if overload exceeds |
| Protection |
105%
of nominal at 20 seconds, 120% at 10 seconds, 130% at 3 seconds |
| Short
Circuit |
UPS
output cut off immediately or input circuit breaker protection |
| Battery |
| Type |
Sealed,
Maintenance-free |
| Back-up
time |
5-15
min |
7
- 17 min |
10
- 25 min |
15
- 30 min |
| Recharge
Time |
4
hours |
| Alarm |
| Battery
Back-up |
Slow
beeping sound every 4 seconds |
| Battery
Low |
Rapid
beeping sound every second |
| 100%
load |
Continue
beeping evry 4 seconds |
| Overload |
Continue
beeping sound |
| Environment |
| Abient
operation |
3500
meters max. elevation, 0-95% humidity non-condensing, 0-40°C |
| Audible
Noise |
<
40dBA (1 meter from surface) |
| Mechanical |
| Weight/net(kgs) |
2.6 |
2.6 |
3.6 |
3.7 |
| Dimension(WxDxH) |
97x265x135 |
